OUR PRODUCT: STEEL PIPE
Noksel España manufactures spiral welded steel pipe for water system transmissions, oil and gas conveyance, infrastructure projects, piling industries, casing piles, and marine and port works. We have worked around the world thanks to our experienced career in steel pipes production. We work to produce a high-quality product: an efficient solution with a long operational life.
USAGE AND SECTORS
Spiral welded steel pipe for water transmission: human consumption supply, raw water or irrigation systems.
- High pressure resistance.
- Water tightness.
- High impact resistance during set up.
- Conveyance without rubber gaskets.
- Special components made by the same pipe material.
Oil & Gas
Spiral welded steel pipe for gas and oil lines, and for refineries transportation of liquid.
- Outside diameter from 16” to 100”.
- Quality up to API 5L, X80.
Piling pipes and structures
Spiral welded steel pipes for infrastructure projects, piling industries, casing piles, marine and port works.
- Pipe length up to 23 m without joints.
- Outside diameter from 16” to 120”.
- Prefabrication like interlocks or clutches for combi-wall, pipe shoes, reinforcing plates, handling holes, etc.
|ASTM A 252|
|EN 10219-1 (CE mark according to Regulation (EU) No. 305/2011 for the marketing of construction products).|
PIPE END TYPES
|Butt weld joint||It is the most used method to weld pipe ends. Bevelled pipe ends are welded by a special team under the corresponding standards.|
|Spigot and socket joint||Specially used for water projects and easing the set up at worksite.|
|Spherical socket joint||Provides the possibility of a rotation 6º to 10º depending on the diameter. It eases set up and avoids special pieces.|
Pipe end types
JOINTS WITH AIR CHAMBER
|Joints with air chamber||
An insulating sleeve with air chamber can be added to avoid internal lining repair in welded joints at worksite. The insulating sleeve is manufactured with an air chamber, wire mesh and steel sleeve. They are usually used for small diameters.
Spigot and socket joint with air chamber
Spherical socket joint with air chamber
OIL & GAS
For maritime works splash or immersed of piles and dolphins are protected in accordance with ISO 12944 by surface preparation as per ISO 8501 and 8502.
The epoxy either high built, or with glass flake epoxy is applied under controlled and monitored temperature and humidity.
Aerial or above water parts are usually protected with final coat of polyurethane.
Av. Mediterráneo, 5 – 1ºG
28007 Madrid (MADRID)
Tel: +34 91 535 17 90
Fax: +34 91 534 69 42
Autovía del Mediterráneo Km. 644
Plg. Ind. Saprelorca, Buzón 216, Parcela X-1
30817 Lorca (MURCIA) SPAIN
Tel: +34 968 92 50 02
Fax: +34 868 10 48 96